Recsea WHS-RX1, Руководство пользователя

Страница: 5 / 12

ATTENTION!
※
The housing Mode and Exposure Compensation Dials are designed to turn the camera's
Mode and Exposure Compensation dials back and forth via friction from the o-rings that
come in contact with theses dials inside the housing. When installing or removing camera
pull both the housing Mode and Exposure Compensation Dials up. After installation be
sure to push the dials down in the proper position for contact. Should the O-rings begin to
slip, use a soft dry cloth to wipe away any oil and other contaminates that may cause the
loss of friction.
※
Please refer to camera manual for explanation of controls and functions.
※
Use Strobe Mask with External Strobe Connection Mount are required for attaching fiber
optic flash cables.
※
The Diffuser may be attached as shown above. Attache Diffuser using the grooves
provided on the Lens Port.
NOTE: During use make sure the housing Mode and Exposure Compensation Dials are
down.
OPENING AND CLOSING THE BACK COVER
※
Please do the following operations in a clean area with low humidity and dust.
To OPEN, press Lock Lever while pulling Secure-Latch away from housing main body.
To CLOSE, press Secure-Latch into place making sure the latch on the underside is properly
placed in the Secure-Latch groove attached to the main housing body. Push into the locked
position. Double check to make sure it is firmly locked into place.
3.