Recsea WHS-RX1, Руководство пользователя

Страница: 10 / 12

6. Place O-ring in the O-ring groove, making sure it is uniform, not twisted or bulging out,
possibly causing water leakage. When closing back cover, visually check O-ring Contact
Surface, tracing a finger over it to making sure no hair, lint or other contaminants are
attached.
IMPORTANT NOTES:
※
When housing is not used for long periods, remove O-rings and place in separate plastic
bags to keep them free of dust and other contaminants and store in a place out of direct
sunlight. Please also be careful of prolonged exposure to direct sunlight during use. The
O-ring and housing may become deformed, causing water leakage.
※
After extended periods of non-use, soak closed empty housing in lukewarm for half a day.
Manipulate all buttons and dials several times. Using a soft, dry cloth wipe away water.
CAUTION!
※
The O-ring is an essential part of waterproofing for this housing. Not properly greasing the
O-ring as directed may cause the O-ring to twist in the O-ring groove, possibly causing
water leakage.
※
Always perform the above O-ring, O-ring Groove and O-ring Contact Surface maintenance
and greasing every time you open/close the housing.
※
Please pay close attention and make sure the O-ring is not twisted or bulging, free of any
contaminants (dirt, hair, etc.), and that foreign objects do not obstruct proper closing of the
housing Back Cover.
※
DO NOT clean the housing with volatile organic solvents or chemical cleaning agents such
as thinner, gasoline, and benzine, etc.
※
Lens Port, Flash and LCD windows are manufactured using hard coat acrylic. When
cleaning use a clean soft cloth taking care not to scratch them.
SPECIFICATIONS
Compatible Camera SONY Cyber-shot DSC-RX1 & DSC-RX1R
Maximum Depth 100 meters (328 feet)
Material
Main Body and Back Cover:
Lens Port:
Lever, Buttons, Dials:
Lens, Flash, LCD Window:
Screws, Springs, Shafts:
Corrosion-resistant Aluminum Alloy, Anodized
Corrosion-resistant Aluminum Alloy, Anodized and POM
POM, PC
Hard Coat Acrylic
Stainless Steel, Galvanized
Size (Housing) Dimensions: W158mm x D111mm x H105mm
Weight: Approx. 1120g
(Land)
Accessories Diffuser, Strobe Mask, External Strobe Connection Mount,
Camera Extraction Tabs x 2, Hand Strap, Reserve O-ring,
O-ring, Removal Pick, O-ring Grease
INSURANCE INFORMATION
※
Seatool/Recsea strongly recommends insuring your camera. For more information please
contact your dealer.
CONSUMABLE PARTS
※
For replacement of consumable parts such as O-rings please contact your dealer or
Seatool/Recsea.
8.