Recsea RDH-PG7, Руководство пользователя

Страница: 9 / 16

CAUTION! When not in use store Strobe Mask-External Strobe Connection Mount and Screw
in a secure place so as not to lose them.
2. The Strobe Mask-External Strobe Connection Mount is equipped with a two (2) plug
socket adapter. Remove adapter to access the fiber-optic sockets as shown below.
3. Insert plugs (SEA&SEA) or fiber-optic cable (INON) into sockets provided.
※
Two (2) tripod sockets are provided at the bottom of the housing for use in attaching
optional grip and tray assemblies.
CAUTION! Seatool/Recsea STRONGLY recommends the use of Seatool/Recsea genuine
grip and tray assemblies listed under OPTIONS. Leakage or damages due to the use of non-
genuine options are NOT covered under warranty.
MAINTENANCE
CAUTION! Allowing saltwater and contaminants to dry on housing can damage functions and
O-rings possibly causing water leakage. Clean with fresh water only, using a soft, dry cloth to
wipe away water.
※
A complete housing overhaul is recommended once every year.
1. After use in salt water, wash off salt and other contaminants by soaking empty housing
(with Lens Port Attached) thoroughly in a bucket of fresh water (lukewarm) for 10 to 20
minutes.
2. Manipulate all buttons, dials, and levers several times to flush out salt deposits and other
contaminants.
3. Wipe any water off housing using a clean, soft, dry cloth.
4. Perform O-RING GREASING & MAINTENANCE as instructed.
8.