Recsea RDH-PG7, Руководство пользователя

Страница: 8 / 16

10. Once housing is properly closed perform Pre-Dive Check. Immerse housing (Lens Port
attached) several times, starting with short intervals, gradually lengthening time, checking
for water leakage after each interval while testing camera and housing functions.
※
When entering water use a method of water entry that protects the housing from shock,
which can cause water leakage. If at all possible have housing handed to you after
entering the water.
REMOVING CAMERA
CAUTION! After use in water, water will remain in gaps between housing, back cover and
Secure-Latch. Wipe any water off housing with a soft dry towel to prevent water from falling
on camera.
1. Using the Flash Close Lever close camera flash unit.
2. Pull Drive Mode Dial, Mode Dial, and ON/OFF Switch up away from housing.
3. Open housing as instructed on page 4., OPENING AND CLOSING THE BACK COVER.
4. Carefully remove camera.
HANDLING PRECAUTIONS
CAUTION! Housing LCD Window, Flash Window, and the lenses of some optional Lens
Ports are manufactured using hard coat acrylic. When cleaning use a clean soft cloth taking
care not to scratch them.
INTERNAL AND EXTERNAL STROBE
※
Accessory Shoe can be used for installation of target lights. Be mindful of the weight of
the light. For heavy lights and strobes use SEATOOL/RECSEA optional Grip & Tray
Assembly and compatible connector.
CAUTION! Damage is irreparable.
※
Please refrain from using lights attached to the Accessory Shoe as a carrying handle.
※
While in the housing, the camera flash can be deployed using the housing Flash Open
Button and Flash Close Lever. Be sure to manually close the flash prior to removing back
cover from housing.
※
Use the Strobe Mask-External Strobe Connection Mount to connect external strobe plugs
or fiber-optic cables.
Connecting fiber optic cable for external strobe use:
1. Using the white screw provided attach the Strobe Mask-External Strobe Connection
Mount to the housing covering the Flash Window.
7.