Page 5
9. Connect a full flow shut off valve (not supplied) and a double
check valve (not supplied) to the mains cold water pipe.
Ensure all fixings are fully tightened and joints sealed.
10. Unbox the Recoup . Included within the box is
the main unit, four height adjustable feet, the
installation documents and SAP identifier label.
13. Position the under the bath.
14. Adjust the feet so that the end of the furthest from
the SVP soil connection is 30mm to 40mm higher than the
other end. This is so that the shower waste water flows
through the unit from one end to the other.
11. The incorporates symmetrical connections at
either end. Orientate the unit whichever way best suits for
the position of the mains cold water and waste water pipe
connections under the bath.
12. Screw the height adjustable feet into the threaded inserts
in the corners of the unit. Use the longer threads
on the higher edge of the .
15. Ensure that the unit is horizontal at both ends perpendicular
to the flow of shower waste water.
16. Even packing under each adjustable foot may be required
if the waste water outlet at the lower end of the is
not higher than the connection to the soil pipe.