Recordex TechDisc Pro страница 4 Скачать руководство пользователя | Manualshive

Страница: 4 / 38

background image

4

©2007 Recordex USA, Inc. All rights reserved.

Version: 1.2

User’s Guide

Recordex TechDisc Pro CD

®

TM

The following type conventions, terms, symbols, and abbreviations are used to make it easier for you to navigate the infor-

mation contained in this Users’s Guide.

Symbols

CAUTION: Indicates a caution warning regarding operation of the system that may lead to personal injury or dam-
age to the duplicator. Be sure to take careful note of any instruction flagged with a caution symbol.

IMPORTANT: Indicates a note regarding the proper use of the duplicator. For best results you should pay careful
attention to instructions flagged with the important information symbol.

NOTE: Indicates a note that may provide useful information regarding operation of your duplicator. Reading
these notes will help you to better understand how your duplicator operates.

UP ARROW: This represents the up arrow control button on the duplicator’s control panel. This symbol is used to
indicate when the up arrow button should be pressed while operating the duplicator.

DOWN ARROW: This represents the down arrow control button on the duplicator’s control panel. This symbol is
used to indicate when the down arrow button should be pressed while operating the duplicator.

ENTER: This represents the enter control button on the duplicator’s control panel. This symbol is used to indicate
when the enter button should be pressed while operating the duplicator.

ESCAPE: This represents the escape control button on the duplicator’s control panel. This symbol is used to indicate
when the escape button should be pressed while operating the duplicator.

Terms

SYSTEM, MACHINE, or UNIT: These terms all refer to your duplicator.

CONTROL PANEL, CONTROLLER: These terms refer to the user interface of your duplicator (see Chapter 1, Control Panel).

LCD DISPLAY, MENU: These terms refer to the blue user display located on the control panel.

MASTER DRIVE or SOURCE DRIVE: These terms refer to where the source data is stored.

TARGET DRIVE or COPY DRIVE: These terms refer to where the source data will be copied.

MASTER DISC or SOURCE DISC: These terms refer to the CD or DVD Disc that contains the data to be copied.

TARGET DISC or COPY DISC: These terms refer to the blank CD or DVD Discs.

COPY, BURN, WRITE: These terms refer to the process of permanently writing data to a copy disc.

IMAGE: This term refers to a disc’s contents when it is stored on a hard drive instead of a CD or DVD disc.

Type Conventions

These distinctive typefaces are used in the user guide to depict a control panel buttons and information that is displayed on

the control panel menu:

• Menu buttons that you press will appear in upper case bold typeface, I.e.

UP, DOWN, ENT, ESC.

•

Information that is displayed on the LCD will appear in this typeface:

1. Copy.

!

i

2

ENT

ESC

«
...
2
3
4
5
6
...
»

Содержание TechDisc Pro







































Отзывы:

Нет отзывов

Похожие инструкции для TechDisc Pro

Бренд: Teac Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды