Recordex TechDisc Pro страница 26 Скачать руководство пользователя | Manualshive

Страница: 26 / 38

background image

26

©2007 Recordex USA, Inc. All rights reserved.

Version: 1.2

User’s Guide

Recordex TechDisc Pro CD

®

TM

11. Setup

Figure 5.20

Disc Info Function

11-08.Setup

Auto Prescan

11-09.Setup
Eject Disc

11-09 EJECT DISC

This setting determines whether a disc is ejected at the end of a

copy or test cycle. The default setting is to eject only the discs
that have successfully copied (Eject Good Only). The available
options are: Good Only, All Disc, Do Not Eject.

11-10 BURN ON THE FLY

This setting when enabled allows direct copying from a CD or

DVD. If turned off the duplicator will first copy the data from
the source disc to the hard drive and then copy from the hard
drive to the target discs. Copying from the hard drive is more
reliable but not always as convenient.

11-11 BURN MODE

This setting switches the burn mode between TAO (Track-at-

Once) and DAO (Disc-at-Once). In most cases the duplicator
will automatically switch modes if the selected mode is not com-
patible with the disc.

11-10.Setup
Burn On The Fly

11-11.Setup
Burn Mode

11-12.Setup
Display Time

11-12 DISPLAY TIME
Enabling this setting will cause the elapsed time to be dis-
played after a copy or test process is complete.

11-13.Setup
Button Sound

11-13 STARTUP MENU
If desired the button sound can be turned off by changing this
setting.

11-14.Setup
Device Info

11-14 DEVICE INFO

The controller is able to report on the model number and firm-

ware version of each device inside the duplicator. To access
this information select Device Info and scroll through the devices.
Pressing ENT will display details for each device.

11-15.Setup
System Info

11-15 SYSTEM INFO

To view the duplicator model number and firmware revision

select System Info and scroll through the available data.

Continue on next page.

11-08 AUTO PRESCAN

When turned on the auto prescan function will check source discs

before starring a the copy process to verify that the disc is
able to be read. The default setting is off.

11-16.Setup
Quick Erase

11-16 QUICK ERASE

The duplicator is capable of performing a quick erase function

on any re-writable disc.  Simply place re-writable media that
you wish to erase in the target drives and select the Quick
Erase function.  The media will appear blank.  NOTE: The data
is not truly erased but the discs can now be used as blank me-
dia.  To fully erase a disc use the Full Erase function.

«
...
24
25
26
27
28
...
»

Содержание TechDisc Pro







































Отзывы:

Нет отзывов

Похожие инструкции для TechDisc Pro

Бренд: Addonics Technologies Страницы: 2

Бренд: StarTech.com Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды