Recordex ST4-650U, Руководство пользователя

Страница: 13 / 24

USER MENU LIST
11
1. NETWORK & CONNECTED DEVICES
Ethernet: Plug an ethernet cable into the LAN IN-port on the bottom
of the IFP, the IFP will get an IP address automatically and connect to
the internet.
WiFi: Turn the WiFi on. Select the network from the WLAN
network list to connect it
.
Note:
Once the device is connected to the WLAN network
successfully, then whenever the network is available, the
device will reconnect to the network automatically without
entering the password.
Portable hotspot: Enables a portable WiFi hotspot.
Bluetooth: Automatic search for Bluetooth devices.
2. DEVICE
2.1 Picture: Adjusting picture.
P
ic
tu
re
Picture mode
Select picture mode.
If you select “User,” you can set the
level of the
Contrast, Brightness,
Saturation, Sharpness as you desire.
Energy mode Select the energy-saving mode.
Color temperature Select the color temperature.
Anti-blue light
Turn on to decrease blue light to protect
eyesight.
Blue light level
When the Anti-blue light is on, the Blue
light level can be adjusted.
Backlight Set the overall brilliance of the IFP.
A
dv
a
nc
e
d
Contrast Adjust the contrast.
Brightness Adjust the brightness.
Saturation Adjust the color saturation.
Sharpness Adjust the sharpness.
Display mode
Select the aspect ratio (display
proportions).
MEMC
Frame rate upconversion. (Only for 4K
model)
Overscan
Adjust the reproduction ratio. You may
activate this function to obtain a clearer
picture.
Note : Overscan is only
adjustable when PC mode is off & the
signal is not in a 4K resolution.