Recordex® RX-100™ DVD/CD AutoLoader - QuickStart Guide
STEP 2: Assemble AutoLoader
Figure 2.1 Insert Input Tank Guide Rods
STEP 2a: Insert the four Input Tank
Guide Rods into the holes on the top
of the base unit.
STEP 2b: Insert the 50 or 100-disc
collection tub into the slot on the left
side of the duplicator. NOTE: When
using the 100-disc tub the tub will
hang over the table edge.
Figure 3.1 Plug In AutoLoader
Plug end B into the rear of the base unit. Plug end A into a grounded 110V
electrical outlet.
1. Connect the power cord to the RX-100SA.
2. Connect the power cord to the wall outlet.
NOTE: Use only a grounded outlet. It is highly recommended that you pro-
tect your autoloader from possible electrical damage by connecting it to a
surge protector or an uninterruptible power supply (UPS).
A
B
STEP 3: Connect Power to RX-100
2b
