Recordex RX-100SA, Быстрый старт

Страница: 10 / 16

Recordex® RX-100™ DVD/CD AutoLoader - QuickStart Guide
To make copies in 1 to 1 Duplication mode simply place a master disc in the
source drive located in the left side of the unit, then select the number of cop-
ies you wish to make and press enter. Be sure to have enough blank media
loaded into the input bin.
1 to 1 Duplication
Increase
Quantity Decrease
Quantity
Press Enter to Start
Copy Process
Press Enter to Set Copy Quantity
& Start The Copy Process
NOTE: This step is only present
when a hard drive has been
installed. If you choose No then
the RX100 will copy the source
disc from the source DVD drive
directly, if you choose Yes then
the RX100 will first load the
source disc image to the hard
drive, and then proceed to write
to the target discs using the
hard drive as the source. Copy-
ing from the hard drive is usually
a little faster and can be more
reliable
for copying large
amounts of data at high speed.
It is recommended to copy from
the hard drive if you are making
a lot of copies.
Change Selection
from Yes to No
Confirm
Selection
Figure 5.4 1 to 1 Duplication Mode