Safety instructions and regulations
1
BAL_SYS20_RED_EN_2V2_REC_102-020110693
8/ 27
Intended purpose of use
The system is designed exclusively for use as a pedestrian passage. The installation may only occur
in dry areas. If there are deviations then proper waterproofing and water drains will be required on-
site.
Any other application or use beyond this purpose is not considered to be an intended purpose. The
manufacturer bears no liability for any resulting damage; the operator alone shall bear the associated
risk.
The intended purpose also includes observation of the operating conditions specified by the manufac-
turer, in addition to regular care, maintenance and repair.
Interventions in or alterations to the installation performed by non-authorized maintenance technicians
exclude the manufacturer's liability for consequential damages.
Control of safety devices
Beside the maintenance carried out at regular intervals by a service technician or authorized person,
it is recommended, for additional safety, that the operator regularly controls the essential elements of
the door. You will find a check-list of the functions to be tested monthly at the end of this document.
Storage of the manual
After the installation of the system, the instructions should be stored in an accessible and dry place.
1.5
1.6
1.7
