Record STM 20 RED/DUO, Руководство пользователя

Страница: 8 / 36

Control module STM 20
2
B6_Control_SYS20_EN_V1.3.doc
Art. Nr. 102-020401135 8 / 36
2.2. Type plate STM 20
STM20
Jumper Change of function
JP1 Jumper on HEA
Allows emergency stop and HEA to be connected in series:

HEA

3-2

Emergency stop

2-1
JP2 Standard / CO48
Influences motor-driven braking function in case of power
failure
(weaker with CO48)
JP3 Syst.-conditioned, internal Not visible – reserved for future applications
JP4 Standard D-ST & EST L
Change plugging to reverse rotational direction (EST-R)
– The resetting of the control is required
JP5 Standard master mode Slave – only in case of two STM
Light-emitting diode Meaning
LD1 Red control-LED
For MF button S1 – blinking, when button is pressed
LD2
Ground – Red control-
LED

Must light up, if protective earth screw is withdrawn

Otherwise grounding is on
LD3 green + 24 V

Is on, if 24 volt circuit is OK

Comes off in case of short-circuit in 24 volt
LD4 green + 32 V

Is on, if system connected to mains voltage
Multifunctional key Function, after impulses have been given
1 pulse Releases an opening movement (AKI)
2 pulses Calibrating ELS
3 pulses Calibrating door parameters
4 pulses Entering programming level
5 pulses

Battery emergency reaction, as long as system is discon-
nected from mains

Battery test in case of mains connection
8 pulses Loads default values of door type selected