Record 5100 Series, Руководство пользователя

Страница: 13 / 21

If the door is in “Partial Open” mode,
enabling TOWA will provide full door
opening if traffic approaches on both
sides, or occurs for more than 10 sec.
Operation mode >
SERVICE STG
Maintenance >
Functions >
Configure System
Learning System >
Parameter >
PARAMETER
CAN-BUS >
Input/Output >
Miscellaneous >
Entrance System >
Control Panel >
Locking >
INPUT/OUTPUT
Ext. Sw IN 0
Emerg. Open/Close 0
EMERG, STOP Reset 0
SIO >
SIS 2
SIA 1
SIA
1 Stop
2 Creep
SIA=Function of
door with safety
signal across
door opening
while closed,
typically folding
door.
SIO=Function of
door with safety
input during
opening cycle.
Operation mode >
SERVICE STG
Maintenance >
Functions >
Configure System
Learning System >
Parameter >
PARAMETER
CAN-BUS >
Input/Output >
Miscellaneous >
Entrance System >
Control Panel >
Locking >
MISCELLANEOUS
TOWA 1
Push to actuate open 0
Push to actuate close 0
Holding force 0
Lead time open 0
Lead time close 0
TOWA
0 disabled
1 enabled
Operation mode >
SERVICE STG
Maintenance >
Functions >
Configure System
Learning System >
Parameter >
PARAMETER
CAN-BUS >
Input/Output >
Miscellaneous >
Entrance System >
Control Panel >
Locking >
MISCELLANEOUS
TOWA 1
Push to actuate open 0
Push to actuate close 0
Holding force 0
Lead time open 0
Lead time close 0
Push to actuate open
0 Disabled
0 Normal
0 Partial
Default: Disabled
Normal: If enabled, will automatically
open after pushed 3mm from closed
position
Partial: Opens to reduced width.
Operation mode >
SERVICE STG
Maintenance >
Functions >
Configure System
Learning System >
Parameter >
PARAMETER
CAN-BUS >
Input/Output >
Miscellaneous >
Entrance System >
Control Panel >
Locking >
MISCELLANEOUS
TOWA 1
Push to actuate open 0
Push to actuate close 0
Holding force 0
Lead time open 0
Lead time close 0
Push to actuate close
0 Disabled
0 Normal
Default: Disabled
Normal: If enabled, will automatically
close after pushed 30mm from closed
position
Holding force can be used.
Hold open time has no influence.
Operation mode >
SERVICE STG
Maintenance >
Functions >
Configure System
Learning System >
Parameter >
PARAMETER
CAN-BUS >
Input/Output >
Miscellaneous >
Entrance System >
Control Panel >
Locking >
MISCELLANEOUS
TOWA 1
Push to actuate open 0
Push to actuate close 0
Holding force 0
Lead time open 0
Lead time close 0
Holding force
0
Force required to
activate “Push
to actuate”
function in
opening and
close.