Record Power bbs1 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 16

Record Power bbs1 Скачать руководство пользователя страница 5

5

bypass or modify the interlocks to allow the machine to be used
without the guards in place.

27. Maintain your machine with care

• This manual gives clear instructions on installation, set up and

operation of the machine and also details any routine and
preventative maintenance that should be performed periodically by
the user.

• Remember always to switch off and unplug the machine from the

power supply before carrying out any setting up or maintenance
operations.

• Follow any instructions for the maintenance of accessories

and consumables.

• Do not use compressed air to clean the machine. Always use a brush

to dislodge dust in places that are awkward to reach and a dust
extractor to collect the waste.

• Inspect electric cables periodically and, if damaged, have them

replaced by an authorised service facility or qualified electrician.

• Inspect extension cables (if used) periodically and replace if

damaged.

28. Keep cutting tools sharp and clean

• Correctly maintained cutting tools are easier to control and less

likely to bind.

• Cutting tools and blades can become hot during use. Take extreme

care when handling them and always allow them to cool before
changing, adjusting or sharpening them.

29. Disconnect the machine from the power supply

• When not in use, before servicing, changing blades etc. always

disconnect the machine from the power supply.

30. Check for damaged parts

• Before each use of the machine, it should be carefully checked to

determine that it will operate properly and perform its
intended function.

• Check for alignment of moving parts, binding of moving parts,

breakage of parts and any other conditions that may affect the
operation of the machine.

• A guard or other part that is damaged should be properly repaired

or replaced by a qualified person unless otherwise indicated in this
instruction manual.

• Do not use the machine if the switch does not turn the machine ‘ON’

and ‘OFF’.

• Have defective switches replaced by a qualified person.

31. Warning!

• The use of any accessory or attachment, other than those

recommended in this instruction manual, or recommended by our
Company may present a risk of personal injury or damage to the
machine and invalidation of the warranty.

32. Have your machine repaired by a qualified person

• This machine complies with the relevant safety rules and

standards appropriate to its type when used in accordance with
these instructions and with all of the standard safety guards and
equipment in place. Only qualified persons using original spare parts
should carry out repairs. Failure to do this may result in considerable
danger to the user and invalidation of warranty.

33. Caution! Motor may become hot during use

• It is normal for motors on some machines to become hot to the

touch during use. Avoid touching the motor directly when in use.

«
...
3
4
5
6
7
...
»

Содержание bbs1

















Отзывы:

Нет отзывов