Page 10
IF CAMERA DOES NOT POWER UP
•
Check batteries, make sure they are installed and seated correctly.
•
Check that batteries are inserted in the right direction (polarity).
•
Make sure batteries are new and have a full charge.
•
If camera was busy or in the middle of an operation, the start process may need
to be repeated.
IF PICTURES ARE NOT CLEAR
•
Check lens, make sure it is clean. Clean with soft cloth, or cotton tip, and mild
detergent.
NIGHT PICTURES ARE BLACK WITH NO SUBJECT
•
Subjects may be triggering camera outside of flash range. Set PIR sensitivity to
normal or low setting. Make certain subject distance is 25 feet or less.
IF NOT STORING PICTURES / SD CARD
•
Make certain the MicroSD memory card is not full.
•
Make certain the MicroSD memory card is installed correctly in camera.
•
Verify the camera recognizes the card and that the card capacity (picture
count) shows in the lower left LCD screen.
•
If card capacity or picture count does not show, format or replace the card.
NUMBER OF PICTURES TAKEN IS LOW
•
The PIR sensitivity may be set too low. Change sensor level to “HIGH”.
Typical SD Card Storage Capacity Chart
SD Card Size
2 GB
8 GB
16 GB
32 GB
Image Size
Number of Pictures
2MP
4,500
18,000
36,000
72,000
5 MP
2,900
11,600
23,200
46,400
8 MP
875
3,550
7,150
14,300
Video Size
Video Time
720P ( HD)
18min
1hr 16min
2hr 31min
5hr
640x480
50min
3hr 27min
6hr 52min
14hr
320x160
2hr 23min
9hr 49min
19hr 30min
40hr
Содержание HS100 Series
Страница 1: ...HS Series 100 User s Manual ...
