39
38
5. Thread the metal harness
brackets back through the
slots on the seat. Turn
over the seat and snap the
brackets into place.
6. Replace the Comfort
Memory foam.
7. Replace the main cover by
sliding it over the plastic frame
and headrest and tucking the
elastic underneath the cup
holders.
8. Replace the buckle pad, the
cup holder inserts and the
comfort insert if necessary.
6
7
8
5
Section 14: Trouble Shooting
In certain vehicle applications, you may encounter
challenges to safely install and position a child in the restraint
system. If you do not find an adequate solution, call us at
1-888-9RECARO for assistance.
Problem:
The vehicle seat belt is not tight fitting to the base.
Solution:
Press downward on the base and firmly pull the
slack out of the seat belt. This will allow the child
restraint to compress the vehicle’s seat and allow
the seat belt to be further tightened. If seat belt is
not locking call 1-888-9RECARO for help. Refer to
installation instructions, pages 22-28.
Problem:
The child restraint is not stable when driving.
Solution:
Check to see if there are items under the base and
that the seat belts are tightly secured. Remove
anything found. Some vehicle seats are deeply
contoured making it difficult to safely install a child
restraint. If the child restraint is not stable due to
the vehicle seat contour, move it to another seating
location. Also rever to page 21 to ensure the seat
belt system is locked.
TRIM COVER INST
ALLA
TION
TROUBLE SHOOTING
