REBOTEC / BA No.: 02.07.147/2017-01
GB
- 3 -
Packaging
Keep
the
packaging
for
later
transport. This will allow proper
packaging in the event of a return
shipment.
1. General advisories
1.1 Introduction
In this User Instructions booklet you will find
information and advisories for start-up, use,
operation, maintenance and care of the Phoenix
PU-E and PS-E wheelchairs.
Carefully read the User Instructions before using the
product. Abide by the safety instructions and act
accordingly.
1.2 Note LINAK-mounting instructions
The assembly instructions for the electronic drive
unit of LINAK GmbH are also applicable. The as-
sembly instructions can be downloaded from
www.linak.de. This also makes it possible to print
out the information and read it if necessary.
The names listed in the table lead to the corre-
sponding documents via the search function of the
website.
1.3 Intended proper use
The wheelchair is for household and out-patient
purposes. It is to be used exclusively for
assistance when going to the toilet, showering
(only with the seat cushion with hygiene opening:
model PU-E) or when transferring a person
indoors.
Rolling over a toilet is
not
possible!
The shower cabin should be constructed so that it
is possible to travel into it with a wheelchair. The
wheelchair is not suitable for extended periods of
sitting and for long patient transfer distances.
Persons with limited perception and senses, joint
damage in the arms, and inabilities to sit may not
use this wheelchair.
Maximum user weight is ca. 150kg
(330.69lbs)
.
1.4 Symbols used
1.5 Use and storage
The product’s temperature range for use must be
between
+41°F and +104°F
. Store the product in
a dry room with a relative humidity of
30-50%
. The
product may be used outside of these ranges, but
only for a short period of time.
Avoid heat sources impacting the product for
longer time periods (see safety advisory: “Caution:
danger of injury”).
The chairs may not be used in swimming pools or
sauna areas because the surface may change
colors, and limitations with respect to mechanical
stability may result.
1.6 Equipment
The chairs are made of a plastic frame, a lifting
frame made of aluminium mounted on four 5-inch
swivel castors equipped with locking brakes. The
armrests can be swiveled and have a latching
mechanism.
The footrests are height-adjustable and may be
removed or folded away. The headrests are
height-adjustable and can be rotated.
The chair’s inclination adjustment for the patient’s
back position is done by a lever unit.
With the electric lifting unit, the patient can be lifted
approx. 400mm (15.748
”).
Depending on the equipment, a PUR pad is
included for transport purposes or a PUR pad with
hygiene opening (including commode pan).
Rebotec Description
LINAK Description
Linear actuator
Actuator LA31
Hand switch
Hand switch HB30
Battery
Battery module BAJ1
Control unit
Power supply CBJ2
External battery charger
External battery charger
CHJ2
Read the
instructions!
Year of
Manufacture
Product complies to the Medical
Products Directive 93/42/EEC
Caution!
Read the safety advisories
Attention!
Advisory
Important
Information!
Care
advisory
Maintenance
advisory
Danger of
hand injury
Stepping on
surface
forbidden
Caution!
Abide to
max. user
weight or
load limit
150kg
(330.69 lbs).
IPX5
IPX6
Types of
protection
See point
point 13
max.
150 k
g
Содержание Phoenix PS-E
Страница 15: ...REBOTEC BA No 02 07 147 2017 01 GB 15...