Rebotec Phoenix PS-E, Инструкция пользователя

Страница: 14 / 16

REBOTEC / BA No.: 02.07.147/2017-01 GB
- 14 -

Do not use an abrasive scouring agent or cleaner
(read the product instructions!) that contain
aggressive solvents (acids, benzene, thinners,
alcohol).

Do not use stiff cleaning objects (e.g. brushes), as
these will damage the plastic surfaces or cause
deposits to build up on the plastic parts and other
materials.
Attention! Before any cleaning, press the
emergency stop switch.
Protection
class
Cleaning instructions
IPX5
Washable with water and brush but
without running water or immersion
bath.
IPX6
Washable with water and brush.
Water can be used with pressure.
The system must not be exposed
directly to the high-pressure cleaner
jet. Max 20°C (68° F).
Keep the product clean, and clean it on a regular
basis. Hygiene must be monitored carefully,
especially in sensitive areas.
In order to ensure the protection class (IPX5 &
IPX6), all electrical components must be
installed with each other and none of the
connections (C) must be open.
14. Maintenance and upkeep
The cause of accidents or damage may be traced
back to a late detection of wear and/or improper
use, as well as irregular maintenance and upkeep.
For safety reasons and for preventing
accidents, the chair must undergo a
complete maintenance at least once a
year (refer to the Medical Products Act and
local requirements).
14.1 Maintaining the chair
Regular safety-technical checks are necessary:

The product for visible damage (cracks,
fractures, loose parts, instability).

All screwed connections for tightness (especially
the castor wheels and frame).

Function of the armrests and latching pins.

Function of the footrests (replace defective foot
plates).

Rolling ability, check function of the wheels
(replace defective wheels).

Function of the castor locking brakes (replace
defective brakes).

Function of the headrest.

Function of the chair inclination.

Check accessories for inadequacies.

In the event of any inadequacies, do not put the
product to use and do not carry out any repairs
on your own.
Contact an authorized dealership or
REBOTEC.
14.2 Maintenance electronic components
Regular safety checks are required:

Check the wiring

Check the charge level before each
commissioning

Regularly check the ventilation openings in the
batteries.

Charge the battery modules regularly.

The batteries have a lifetime of 4 years depending
on the intensity of use and the general handling.

In the case of inconsistencies, do not operate the
unit and do not perform repairs on your own.
Please contact your dealer or
REBOTEC.
Warning: There is a danger of injury from
slipping and pinching!
14.3 Upkeep

If you have questions concerning maintenance
and repairs to the chair, then contact an
authorized dealer or medical equipment supply
outlet.

In the event of damage and/or needed repairs,
contact the authorized dealership without delay.

Never make any unauthorized modifications or
conversions to the chair or the electric system.
These will adversely affect the safety and
function of the chair.

When making repairs, use only original spare
parts from
REBOTEC
and LINAK.
Observe all
advisories concerning guarantee and warranty.

Once a complete maintenance or repair of the
chair is done, carry out a complete cleaning for
assuring
hygiene. Follow the cleaning
instructions.

Follow the instructions for spare parts ordering,
re-use, and lifetime.
For documenting maintenance and repairs,
REBOTEC offers a maintenance protocol.
You may order User Instructions and
maintenance protocol forms, or view them at
www.rebotec.
com.au