REBOTEC /
BA-Nr.: 02.07.132/2021-11-A01
- 8 -
EN
•
The patient must
support themselves with
their arms on the armrests
and slowly rise from the
seat.
•
Do not lean your
body too far forward to
avoid a potential risk of fall-
ing.
•
The patient should be helped to stand up by the
nursing staff.
Caution: Danger of falling!
•
The patient must
never leave their feet on the
footrests when sitting down
or getting up .
12.3 Operation of the parking brake
wheel, 24”
•
Push the brake lever (1) all the way back. Loosen
the Allen screws (2) of the parking brake only
slightly with a spanner (SW 5). Push the parking
brake up to approx. 25 mm in front of the wheel
profile 24" and tighten the Allen screw.
•
Check the function of the parking brake by pushing
the lever forward. If the braking effect is still not
sufficient, readjust (reduce or increase the dis-
tance).
12.4 Swivelling the armrests
•
Pulling out the locking bolts (A) releases the lock-
ing mechanism and the armrests can be swivelled
backwards.
•
When folding up the armrest, check that the catch
on the backrest (B) and the locking bolt (A) are
seated correctly. The armrests can be swivelled
with both hands.
•
To do this, keep the locking bolt (A) pulled during
the entire swivelling process and guide the armrest
to point (C) with the other hand. Only touch the
outer area and do not reach into or through the
armrest.
Check the locking at regular intervals, as
possible limescale deposits on the locking
mechanism can impair function and smooth
operation
.
12.5 Removing the footrests
•
Remove or fold up the seat. Then, raise the foot-
rest by approx. 100 mm and turn outwards by 90
degrees.
•
Now you can push the footrest all the way up and
pull it out.
12.6 Removing the shower/ toilet seat
•
The seat can be removed from its locked position
on the chair frame by lifting it off for cleaning or
replacement.
12.7 Handling of the toilet bucket
•
From the back of the chair, slide the toilet bucket
under the seat. To remove, slightly lift the bucket
and then pull it out backwards.
12.8 Operation of the parking brake
wheel, 24”
•
The parking brake on the 24" wheel is released by
pulling (1) the lever backwards.
C
B
A
3.
4.
1
1
2
