Version Number: RBM-1350 20210712A2
8
The machine is self-shielded flux-cored welding. Connect the earth to the workpiece. Press the torch
switch, start welding. Release it, stop welding.
Attached welding parameters
Circuit breaker current
20A
Cable
Input side
≥1.3mm
2
Output side
≥10mm
2
Earth cable
≥1.3mm
2
3.3 Install wire spool.
0.030”(0.8mm)/0.035”(0.9mm)diameter,
4”(100mm 1kg)wire spool.
Gear wire feed wheel, gear wire feed wheel is suitable for flux-cored welding wire, our standard
configuration has 1 piece of 1kg flux-cored welding wire, which can be directly installed and used.
3.4 Feed wire and set pressure.
3.5 Connect to Input Power.
Please refer to the digital sign on the rear panel of the machine for input voltage. Connecting the wrong voltage
will damage the machine.
3.6 Remove consumables and depress trigger until wire comes out, Replace consumables.
Press and hold the torch switch wrench for more than 3 seconds to not weld. This is fast wire feeding. Let the
welding wire be quickly delivered to the gun head.