Version Number: RBM-1350 20210712A2
5
The welding equipment is equipped with power voltage compensation device. It keeps the machine work
normally when power voltage fluctuating ±15% of rated voltage.
When using long cable, in order to reduce voltage drop, big section cable is suggested. If the cable is too long, it
will affect the performance of arcing and other system function, it is suggested to use the recommend length.
The machine is flux-cored welding. The torch and earth clamp are already fixed well in the machine.
Following with the fixing steps of welder belt. The images shown here are indicative only. If there is inconsistency
between the image and the actual product, the actual product shall govern.
Take the following parts to fix the belt into the
welder.
Fix the belt as figure 1 to 3. The length of
the belt is adjustabe as needed.
Fig. 1
Fig. 2
Fig. 3
3. Operation