Rebel ZAB0115, Руководство пользователя

Страница: 10 / 24

EN 10
VEHICLE BATTERY INSTALLATION
TRIM ADJUSTMENT
BINDING
1. Open the hood of the vehicle and put the battery into the battery compartment.
2. Connect the battery pack to the interface of the vehicle body and close the hood.
When the chassis switch is turned on and the front tires are not straight, use the steering trim to adjust the position of
the wheels:
• When the car oversteers to the left, steering trim should be adjusted towards R.
• When the car oversteers to the right, steering trim should be adjusted towards L.
1. Turn on the vehicle by sliding the ON/OFF switch to the ON position (LED headlights flash).
2. Turn on the remote control by sliding the ON/OFF switch to the ON position (binding LED indicator flash).
3.
When flashing LEDs turn solid, it means that binding has been completed.
1. Connect the vehicle’s battery to the USB charging cable and then to the compatible PC USB port or an AC adapter.
2. Red LED on the USB plug is on during charging.
3.
When red LED goes off, it means that the battery has been fully charged. Disconnect the charging cable from the
battery and the power supply.
VEHICLE CHARGING