Rebel TOOLS RB-1065, Руководство пользователя

Страница: 14 / 33

Cleaning and maintenance
• Before cleaning, make sure the device is switched off and disconnected from the power
supply.
• The dust container can be washed under running water, but it should be thoroughly dried
before reuse. Clean the upper part of the vacuum cleaner a slightly damp cloth.
• If the device is working louder than usual or the suction power dropped significiantly,
check the suction hose and tube for blockage. If they become clogged, remove the object
blocking the airflow with a thin long object.
Note: Working with clogged suction accessories can lead to engine failure.
Replacement and maintenance of the HEPA filter
1. Remove the upper part of the vacuum cleaner by unlocking the latches on the sides of the
appliance.
2. To remove filter:
• unscrew and remove the round part under the filter
• slide the filter towards the previously unscrewed element
3. Filter should be washed under running water.
Note: Do not use detergent or washing accessories to wash the filter. After washing, set the
filter to dry (do not squeeze)
4. The filter can be mounted to the vacuum cleaner only after it has completely dried.
5. If the filter is damaged, e.g. during cleaning, replace it with a new one.
Dust bag change
• Remove the upper part of the vacuum cleaner by unlocking the latches on the sides of the
appliance.
• Remove the dust bag from the air inlet.
• The full dust bag should be disposed of in a suitable dustbin – it cannot be reused.
Storage
• Store the device in vertical position.
• Store the device in a dry place.
• Dust container should be dry before putting the device away.
• There is a catch on the vacuum cleaner housing, which is used to attach the suction tube
to the vacuum cleaner.
EN EN 26 27
CE DECLARATION OF CONFORMITY
Supplier’s name: Lechpol Electronics Sp. z o.o., Sp.k.
Supplier’s address: ul. Garwolińska 1, 08-400 Miętne, Poland
Equipment type
Industrial vacuum cleaner
Model: RB-1065
We, the undersigned, hereby declare that the equipment specified above confirms to the
following directives:
1. EMC
EN 55014-1:2006+A1:2009+A2:2011,
EN 55014-2:2015
EN 61000-3-2:2014,
EN 61000-3-3:2013
2. LVD 2014/35/EU
EN 60335-2-2:2010 +A11:2012+A1:2013
EN 60335-1:2012+A11:2014+A13:2017
EN 62233:2008
3. ROHS 2011/65/EU and 2015/863/EU
EN 62321-1:2013
EN 62321-2:2014, EN 62321-3-1:2014, EN 32321-4:2014, EN62321-5:2014
EN62321-6:2015, EN62321-7-1:2015
EN 62321-7-2:2017, EN 62321-8:2017
Supplier: Lechpol Electronics Sp. z o.o., Sp.k.
Representative’s name: Piotr Wojdat
Place and date of issue: Garwolin, Poland; 14.04.2020