Rebel TOOLS RB-1065, Руководство пользователя

Страница: 13 / 33

OPERATING
Note: Before installing or removing accessories from the device, make sure to unplug it from
power mains.
Before first use, turn the vacuum cleaner upside down and install the supplied wheels,
inserting them in the holes intended for it.
Dry vacuum cleaning
• The use of a textile bag is recommended for dry vacuuming.
• Remove the upper part of the vacuum cleaner by unlocking the latches on the sides of the
appliance.
• Dust bag should be attached on air inlet inside dust binr
• Place the upper part with motor on the lower part and lock the latches.
• Place the end of the hose in air inlet. The correct connection will occur when the hose
latch engages in the appropriate hole on the top of the air inlet.
• Connect both parts of the tube.
• Connect the end of the hose with the tube.
• Install selected nozzle on the other end of the tube.
• Insert the end of the power cord into an electrical outlet.
• To turn on device, press the power button.
• The level of the dust bag full depends on the type of dust being drawn in.
• If the bag is overfilled, it may burst, so it is recommended to check the level of its filling.
Wet vacuum cleaning
• In the case of wet vacuuming, the same operations as for dry vacuuming are performed
in the same way.
• Do not use dust bag for wet vacuuming. The collected liquid should go directly to the
container.
• The HEPA filter housing has a movable element - a float, whose task is to protect the
engine from flooding. If the level of sucked liquid exceeds a certain maximum value, the
float will be sucked into the fan inlet, closing the outflow of air from the container and
protecting the engine from water ingress. The suction power on the suction hose will drop
completely - switch off the vacuum cleaner immediately and empty the container.
Note: If any part of the vacuum cleaner (hose, tube, nozzle) is blocked, immediately turn
off the device and remove the source of clogging. Only after doing this you can return to
vacuuming.
Blowing
• Place the end of the hose in air outlet. The correct connection will occur when the hose
latch engages in the appropriate hole on the top of the air outlet.
• Install selected nozzle on the other end of the tube (to achieve the strongest possible air
flow, it is recommended to use a crevice nozzle).
and using of the device.
27. Do not use this device if the cord or the plug is damaged, or the appliance is broken.
28. Do not attempt to repair this device yourself. Only authorized and qualified personnel may
repair this device. Never disassemble this device.
29. Use only authorized accessories.
30. Do not use the device near explosives. During vacuuming the device produces sparks
which may cause ignition.
31. Do not expose the device to rain or moisture. Water entering a motor will increase the risk
of electric shock.
32. During work, use personal protection equipment. Always wear safety eye protection when
using this vacuum cleaner.
33. After working with the device, roll up the power cord and place it on the hook, which is
located on the air outlet.
Power 1400 W
Power supply 230 V; 50 Hz
Operation radius 8 m
Cable lenght 5,4 m
Hose lenght 1,5 m
Suction inlet 41 mm
Weight 5 kg
Sound pressure level <90 dB
Airflow 30 l/s
Vacuum (max) 18 kPa
Dust bin capacity 15 l
Air inlet filter HEPA
Air outlet filter Foam cover
Dust bag type Textile or paper
In set
Textile dust bag, plastic tube, elastic hose, crevice
nozzle, water brush, 2-step floor nozzle, user’s
manual
Technical data
EN EN 24 25