Rebel TOOLS RB-1001, Руководство пользователя

Страница: 44 / 179

44
EN
• Never grasp the tool (the chuck or the bit/accessory) while in
motion and never place your hands too close to the spinning chuck
or drill bit. Laceration hazard.
• Never change the rotation direction of the chuck while the tool
is still running. Ensure that the chuck has come to a complete stop
before changing rotation direction.
• Avoid touching the drill bit just after use, as it may be hot. Similarly,
when removing the bit/accessory from the tool, wear protective
gloves to grasp it. Accessories (bits) may become hot after
prolonged use. Avoid contact with skin. Burn hazard.
• Always wait until the chuck and accessory have come to a complete
stop before placing it down.
• Some materials may contain chemicals that can be toxic. Avoid
inhalation of dust and any contact with the skin.
Residual risks
Even when the power tool is used as prescribed it is not possible to
eliminate all residual risk factors. The following hazards may arise in
connection with the power tool’s construction and design:
• Health defects resulting from vibration emission if the power tool is
being used over longer period of time or not adequately managed
and properly maintained.
• Injuries and damage to property to due to broken accessories that
are suddenly dashed.
Warning!
This power tool produces an electromagnetic field during
operation. This field may under some circumstances interfere
with active or passive medical implants. To reduce the risk of
serious or fatal injury, we recommend persons with medical implants
to consult their physician and the medical implant manufacturer before
operating this power tool.