10 VUEMATE User Manual
VUEMATE User Manual 11
Names and Functions of Each Part
6
Getting Started
Cautions for Installation
1
How To Use
Make sure to install this product in a place with flat ground after turning
off your engine.
Make sure to check all components inside the gift box and to read
through this User Manual so as to install this product in a correct way.
Be careful not to block your driving sights when installing this product.
Install this product at a safe and light place.
Install this product at a place where your face can be well viewed by the
camera.
Make sure to remove the protection film from the camera lens before
installation.
Keep this product away from any place where the airbags are equipped.
Fix the cigarette power cable not to be visible, which can make your car
clean and safe.
Power socket :
for connection to the cigarette power cable (DC 12/24V)
Camera lens :
for monitoring of the driver's driving condition in real time
Operation status LED :
for display of such statuses as the driver’s
drowsiness, negligence in keeping eyes forward, and movement of the
face beyond the detectable range (in green/blue/red)
USB Port :
for connection of various USB accessories (including LED
warning light/vibrator, etc.) and for update of firmware
Infrared LED :
for detecting the driver's face at the dark nights and the
tunnels with the LED lights
I/O Port :
for interface with an external GPS and other external devices
Function switch :
for control of the volume and the sensitivity
- A short press is for control of the volume (Mute/1~4 step)
- A long press is for control of the sensitivity (High: Level 3; Middle: Level 2;
Low: Level 1)
Infared LED
Camera lens
Operation status LED
Power socket
I/O port
USB port
Function switch
※
Blocking the camera with hand at a distance of approx. 20cm for 3 seconds sets off
sounds and disables/enables the warning sound for “Negligence in looking ahead.”
