Rear view safety RVS-091406, Руководство по установке

Страница: 10 / 22

REAR VIEW SAFETY
10
Installation Guide
1. Locate the reverse taillights wiring behind your reverse light.
You may need to remove the interior panel in order to locate.
You only need to attach the signal booster power wire to
ONE of the reverse lights, not both. If you cannot manually
locate the tail light cables, please contact the vehicle manufac-
turer or reference a wiring diagram for your vehicle.
2. At your taillight, remove the light bulb socket from the
reverse light housing.
3. Determine the reverse light power wires for your car, designat-
ing the positive and negative wires.
4. Connecting the Power Cables:
Insert the power cable into the transmitter (red input).
Connect red wire to reverse light’s positive wire.
Connect black wire to reverse light’s negative wire.
• Plug the attached wire from the Camera into the Wireless
Transmitter. Ensure that the wires are not tangled.
• Determine the best place to mount the Transmitter. The
Transmitter is not waterproof and needs to be protected.
5. Determine the best route for the Camera Cable from the top
of your license plate to the Transmitter. You may need to drill
a small hole in the panel behind where the license plate is situ-
ated.