Rear view safety RVS-091406, Руководство по установке

Страница: 8 / 22

REAR VIEW SAFETY
8
We recommend doing a benchmark test before installation
to insure that all components are working properly.
SYSTEM COMES PAIRED.
• But if there is no image on monitor, your system is NOT paired
and needs to be paired. (see page 13)
Camera Connection:
• Locate the clearance lights wiring on your vehicle. You
may need to remove the interior panel in order to locate.
Connect the power cables for camera: Red wire to light's
positive; Black wire to chassis ground.
Monitor Connection:
• Firmly insert the lighter plug to cigarette lighter socket.
Do not install the monitor where it may obstruct driver’s view
or obstruct and air bag device.
.............................................................................................................................
Cleaning
• If dirt, rain or snow attaches to the camera, the monitor may
not clearly display objects.
• Do not use alcohol, benzene or thinner to clean the camera.
This will cause discoloration. To clean the camera, wipe with a
clean cloth dampened with mild cleaner diluted with water
and then wipe with a dry cloth.
Settings/Maintenance