Ameba-Pro KVS Getting Started Guide
Getting Started Guide All information provided in this document is subject to legal disclaimers. © REALTEK 2020. All rights reserved.
16
5.3.2
Download the Image to Flash
To download image through Image Tool, device need to enter UART_DOWNLOAD mode first.
Steps to download flash are as following:
step 1.
Application will scan available UART ports. Please choose correct UART port. Please close other UART connection for the target UART
port.
step 2.
Choose desired baud rate between computer and AmebaPro.
step 3.
Choose target flash binary image file “flash_xx.bin”
step 4.
Check Mode is “1. Program flash”
step 5.
Click “Download”
step 6.
Progress will be shown on progress bar and result will be shown after download finish.
step 7.
Switch
“
1
”
to OFF from SW7(2V0
、
2V1) or Switch
“
2
”
to OFF from SW7(1V0)
step 8.
Push reset button to start the program.
