realspace 7069205, Инструкции по сборке и информация о гарантии

Страница: 10 / 24

Step Step 6
å
Carefully turn your unit over onto its front edges. Unfold the
BACK (C) and lay it over your unit.
å
NOTE: Be sure the end of the SAFETY STRAP on the TOP
inserts through the hole in the BACK.
å
Make equal margins along all four edges of the BACK (C). Push
on opposite corners of your unit if needed to make it "square".
å Fasten the BACK (C) to your unit using the NAILS (5).
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
NAIL
(30 used in this step)
5
Unfi
nished
sur
face
C
The SAFETY STRAP should
insert through this hole.
Page 10 www.sauder.com/service 426407