Please read this entire guide before using this product. It is the user’s sole
responsibility to follow all of the instructions and safety protocols stated
herein, in addition to all of the safety protocols, warnings, and instructions
provided with the Pyrodigital® Field Controller, and any and all connected
DMX devices. Failure to do so may result in unexpected or undesirable
operation, damage to connected DMX devices, personal injury or property
damage.
This module is to be used only by experienced professionals who have
been fully trained in the operation the Pyrodigital® Field controller, and
any and all connected DMX devices. Do not use this module with any
DMX device(s) that have the potential to cause personal injury or property
damage. If you do, you risk personal injury and property damage. By
proceeding, you assume any and all risks involved in using this module.
Every attempt has been made to design and construct this module to
the highest standards of reliability. However, as with any electronic or
mechanical device, there is always the potential for component failure. As
in any production environment, no authorized or unauthorized personnel
should ever place themselves or be allowed to place themselves in a
position where such a failure would present a risk.
While this module was not designed to control pyrotechnic devices that
the Pyrodigital® field controller was intended for, all safety protocols and
procedures associated with operation of the Pyrodigital® field controller
must nonetheless be followed at all times. It is the sole responsibility
of the user to thoroughly and fully understand the operation and safety
considerations of the Pyrodigital® Field controller and any and all DMX
devices connected to this module.
This module is unable to output DMX data unless it is receiving power from
the Pyrodigital® field controller. Power is only supplied to this module when
the Pyrodigital® field controller key switch is set to the “ARM” position. It
is the sole responsibility of the user to fully understand the behavior of any
and all connected DMX device(s) both when said device(s) ARE receiving
a DMX signal, and when said device(s) ARE NOT receiving a DMX signal.
Do not use this module with any DMX device where the loss of the DMX
data signal during operation may present a hazard.
Warning - Please Read
Содержание PD2DMX-512D
Страница 52: ...D0 15512 01 C ...