Real Time Devices CMT106, Руководство пользователя

Страница: 11 / 18

CMT106 IDE controller utilityModule 7 Real Time Devices USA, Inc.
Chapter 4
C
ONNECTING THE UTILITY
M
ODULE
The following sections describe connectors of the utilityModule.
Finding Pin 1 of Connectors
The pin 1 end of connectors is indicated by a white area silk-screened on the PC board. It is also
indicated by a square solder pad visible on the bottom of the PC board.
Please make certain you have correctly identified pin 1 of a connector before you connect to it and
attempt to use the utilityModule.
Locations
The figure below shows connector locations.
Connector Locations
Connectors
Connector Function Size
CN1 PC/104 XT Bus 64 pin
CN2 PC/104 AT Bus 40 pin
CN3 IDE Connector 44 pin
CN3
CN1
CN2
User’s Manual