www.ReadyLIFT.com - Phone: (877) 759-9991
12
69-6825-IM-AA
69-6825 2.5” Rubicon JL
Connect the electrical connector to the
pumpkin and run the harness next to the
diff vent tube. Clip all remaining clips to
the diff vent tube.
Remove the front brake line bracket at the
frame rail.
Remove the front brake line bracket at
lower control arm.
Install the wheels and lower the vehicle to the ground. Torque the lug nuts to the
wheel manufacturer specs. Jounce the vehicle a few times to settle the suspension to
the new ride height. Torque the upper control arms to
110 ft-lbs
, lower control arms
and track bar hardware to
135 ft-lbs
, and shock and sway bar end link hardware to
50
ft-lbs
.
Park vehicle on a clean flat surface and block the front wheels for safety. Raise the
front of the vehicle and support with jack stands at each frame rail behind the lower
control arms. Remove the front wheels.
