![Ready Rack FH2G Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/ready-rack/fh2g/fh2g_installation-operation-and-maintenance-manual_1424910005.webp)
FH2G
–
Express Dryer
Installation, Operation and Maintenance Manual
4 |
P a g e
RR-120-1
→
120V / 1 PH / 60 hZ
The FH2G dryer is not configurable as a 208 or 240 supplied unit. For 208 or 240 applications
contact Ready Rack for information on FH6G, models RR2401, RR2083 or RR2081 units.
Wiring
•
The two gear dryer is shipped with a standard 120V, 3 prong grounded plug. This can be
utilized with any 15A circuit.
•
If required, the cabinet can be permanently wired into a station power supply by the
following steps by a licenced electrician:
o
Remove rear access panel (4 x #12 hex self tapping screws).
o
Disconnect 12/3 cable from din rail terminal block and release from strain relief.
o
Reconnect electrical supply, with a recommended 20A supply for permanent
supply.
o
Reconnect rear cover.
Figure
–
Rear Access and Strain Relief
Figure
–
Rear Terminal Block