React nomadio, Руководство пользователя

Страница: 44 / 101

Changing the throttle end point value has the following visual effect on the driving screen bars.
Throttle end point value is approximately the
same as the brake end point value.
Increased throttle end point value (more servo
travel for THROTTLE is possible).
Decreased throttle end point value (less servo
travel for THROTTLE is possible).
The position of the pointer on the bar is affected by end point values (throttle and brake) and trim
setting; increasing the throttle end point value may visually appear to have the same effect as
decreasing the brake end point value.
An end point setting of 100 (the default) is typical for most servos, and should always be used for
ESCs. Larger setting values will overdrive most servos
Adjusting the Throttle End Point
The throttle end point value is a relative value, and is expressed as the percentage of full travel to the
THROTTLE end.
Use the navigation controls to adjust the throttle end point as follows:
1. Access the top function menu from the
driving screen.
2. Navigate to the Throttle (Ch2) menu.
or then
3. Navigate to
Throttle End Point
.
or
Value Description
0 Minimum throttle end point; allows NO throttle.
1-199
Throttle end point value is set to a percentage of full
throttle travel.
4. Change the value.
or
200
Maximum throttle end point (will overdrive most
servos)
Trim and EPA Interaction
A trim (or sub-trim) setting of 100 is equivalent to an End point setting of 50.