Reach T-3i, Руководство по установке

Страница: 7 / 11

Warning:
ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE CLEANING OR
SERVICING THE UNIT.
Clean:
General cleaning or the unit will greatly prolong the treadmill.
Keep treadmill clean by dusting regularly. Be sure to clean the exposed part of the deck on either side of the walking belt and
also the side rails. This reduces the buildup of foreign material underneath the walking belt by wearing the clean running shoes.
Warning:
Always unplug the treadmill from the electrical outlet before removing the motor cover. At least once a
Year remove the motor cover and vacuum under the motor cover.
RUNNING BELT AND DECK LUBRICATION
This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction may play a major role in
the function and life of your treadmill, thus requiring periodic lubrication. We recommend a periodic inspection of the deck. You
need contact with our service center if you find the damage of the deck.
We recommend lubrication of the deck according to the following timetable:

Light user (less than 3 hours/ week) annually

Medium user (3-5 hours/ week) every six months

Heavy user (more than 5 hours/ week) every three months
We recommend that you buy the lubrication from our distributor or directly to our company.
Attention: Any repair need the professional technic
i
an.
1, we suggest that you should cut off the power for 10Mints after keep running 1.5HS, so that it’s good for
maintain the treadmill.
2, For avoiding the slipping during running , the belt not too loose; for avoiding the more abrasion between the
roller and belt and maintain the machine’s good running ,the belt not too tight. You can adjust the distance
between plates and belt , the belt be away from the plates about 50-75mm on both sides ,if the best not too tight
and loose.
RUNNING BELT ADJUSTMENT
7