Reach T-3i, Руководство по установке

Страница: 11 / 11

Fault Code Main reason Solution
E01 The wire from computer to bottom
control board didn’t connected well
1
．
Check the connection wire between
Computer a n d c o n t r o l b o a r d w a s
w e l l connected.
2
．
Make sure the IC on the control board
was well inserted. If not re-insert.
3
．
Abnormal power supply in control board.
Please change a new control board.
E02 Protect the exploding
1
．
Bad contact with motor open circuit.
Please change a new motor or check the
connector.
2
．
Power tube was puncture. Please change
a new Power tube or control board.
E05 Overcurrent Protection
1
．
Overloaded
。
2
．
Running board with heavy resistance.
Need to be oiled
3
．
Damage in Motor. Change a new motor.
E06 Control board self-checking
E08 EEPROM damage Change the control board
18