REAC RHC10, Руководство пользователя

Страница: 7 / 14

4
3.3 Waste disposal
All REAC products are marked with this symbol, which according to Waste Electrical and
Electronic Equipment (WEEE) Directive 2002/96/CE means that products marked with this sign
must be taken to a proper disposal site and cannot be disposed in in normal household waste.
RHC10 and RHC15 consist of several parts with different material, which means that they cannot be
disposed as one single item. It is recommended (at disposal) to disassemble and divide the product as
much as possible in to feasible waste groups to be able to recycle the product in the most environmental
friendly way.
The following waste groups have been identified for the hand controls:
Cables Electronics Metal Plastic
RHC10
•
Connection cable
•
PCBA
•
N/A
•
Cover
RHC15
•
Connection cable
•
PCBA
•
N/A
•
Cover
Some of these main groups can be divided into sub-groups, for example metal can be divided into iron,
stainless steel and aluminum and alloy steel. Plastic can e.g. be divided into ABS, PA, PE and PP. All our
plastic units are provided with an interior code for plastic types and fibre contents.
3.4 Warranty
There is a warranty on REAC products against manufacturing faults. The warranty period begins on the
purchasing date of the product and applies for 12 months. Warranty exclusions: REAC is entitled to deny
any warranty if:
· The product has not been correctly used or the product usage specifications (load, environment,
temperature, duty cycle, voltage, current, etc) have not been respected.
· The product has not been correctly maintained.
· The product has been tampered with.
· The product has been exposed to violent or abrasive treatment.
Nonconformities due to age of the product (for example, discolouring of painting) are excluded from
warranty. In case of doubt regarding the existence of a defect or if an inspection is required, REAC
reserves the right to request the return of the product.
Any additional warranty obligations for parts replaced free of charge or for any service provided without
charge under this warranty shall be excluded.
Warranty of the replaced parts under warranty period will end on the date of expiry of the warranty period
of the product concerned.
3.5 Repairs
To avoid the risk of malfunction, all repairs must only be carried out by authorized REAC workshops or by
a REAC appointed representative. Products under warranty must also be returned to an authorized REAC
workshop.