REAC RAL9005, Руководство пользователя

Страница: 18 / 36

15
4.3 Connect control unit via USB adapter
4.3.1 USB adapter overview
4.3.2 Connect USB cable
A regular USB cable (A-B type) is used between the USB adapter and the PC. The cable should be
inserted into the USB connector. See section 4.3.1.
When connecting a control unit to a PC for the first time, the PC needs to get and install drivers to be able
to handle the new control unit. It is recommended to be connected to the Internet while doing this, then it
will all be made automatically.
This will take a while, in the meantime the system will inform that it is working on it, by showing
information, usually in the lower left corner of the screen.
When the driver installation is done, a message will be shown that the device is ready to use.
4.3.3 Connect control unit
Between the control unit and the USB adapter a straight 6.35 mm male to male tele plug cable is used. In
the control unit, it shall be inserted in the HC connector, instead of the hand control. On the USB adapter.
There are three identical HC connectors. Either one can be used.