PRO-SERIES ATHENE - VARIABLE RATE DRILL CONTROL
15
The MS control actuator will move to the '
35'
mark.
Following the instructions on-screen. With the containers in place under the metering devices, turn the crank
as required (refer to the seed drill instruction manual if necessary). Make sure the crank turns the correct no. of
turns according to the seed drill width.
m
2,50
3,00
3,50
4,00
4,50
5,00
5,50
6,00
6,50
tr
60
50
43
37,5
33,3
31,25
30
25
22,5
The display will show the accumulated no. of turns of the seed shaft, the accumulated area, and the theoretical
quantity of seed that has been dispensed.
When you have reached the required no. of turns, stop and then press the '
END
' key.
Weigh the dispensed seed and then enter the measured weight in kilograms.
Press to confirm.
The unit has now been calibrated, and has stored the "Factor T" for the selected seed type in memory.
