background image

 
 
 
 
Multicall Paging System                                                                                                    User    Manual 
 

IMPORTANT SAFTEY INFORMATION 

RF EXPOSURE STATSURE STATEMENT 

Your Pager Transmitter contains a radio frequency transmitter. 

When the button is pushed the transmitter sends our RF singnals.

CAUTION : 

To comply with FCC RF exposure compliance requirements, 

A separation distance of at least 8 inches(20Cm) must be maintained 

Between the antenna of this transmitter and all persons, during 

Normal operation. The antenna used for this transmitter must not be co- 

Located or operating in conjunction with any other antenna of transmitter. 

Unauthorized antennas, modifications, of attachments could damage the 

Transceiver and may violate FCC regulations. 

 

 

NOTE: This equipment has been tested and found to comply with the limits for a Class 

A

 

digital device, pursuant to part 15 of the FCC Rules.    These limits are designed to 

provide              reasonable protection against harmful interference in a residential 

installation.    This equipment generates, uses and can radiate radio frequency energy and, 

if not installed and used in accordance with the instructions, may cause harmful 

Содержание RCL-T700







Отзывы: