z
Select one of 1~8 Alert time modes, then press “ENTER” key
1) 06 SEC 2) 30 SEC 3) 45 SEC 4) 60 SEC 5) 90 SEC 6) 120 SEC 7) 180 SEC 8) Continuance
( Use the “F1” key to scroll through the 8 alert time modes )
z
The pagers will now respond with your new selected alert time mode.
z
Return all the pagers to the charger base or plug the power supply. The pagers
are ready to receive the page with its new alert mode.
4.
Out of Range
With this feature, the pagers will play a melody when taken out of range from the
transmitter to inform the guest that they are located “Out of Range” and will miss their
page. The melody will only stop, when they return back within range.
To turn the Out of Range “USE” or “NOT”
z
Remove all the pagers from the charging unit or unplug the power supply that is
connected to the charger base
z
At the “Out of Rng” menu, press “Enter” key.
z
Press “No.1” key, then “ENTER” key to turn the Out of Range “USE” (“No.2” key is
to select “NOT”)
z
Return all the pagers to the charger base or plug the power supply. The pagers
are ready to receive the page with its new message mode.
5.
Auto MSG
With this feature, you can choose if you will send some designated messages.
z
Remove all the pagers from the charger base or unplug the power supply that is
connected to the charger base.
z
At the “Auto MSG” menu, press “ENTER” key
z
Then press “No.1” key, then “ENTER” key to select “USE”.
(“No.2” key is to select “NOT”)
z
Return all the pagers to the charger base or plug the power supply. The pagers
are ready to receive the page with its new message mode.
THIS
DEVICE
COMPLIES
WITH
PART
15
OF
THE
FCC
RULES.
OPERATION
IS
SUBJECT
TO
THE
FOLLOWING
TWO
CONDITIONS
:
(1)
THIS
DEVICE
MAY
NOT
CAUSE
HARMFUL
INTERFERENCE,
AND
(2)
THIS
DEVICE
MUST
ACCEPT
ANY
INTERFERENCE
RECEIVED,
