RCF MR 40T, Руководство пользователя

Страница: 8 / 24

8
ENGLISH
POWER SELECTION WHEN LINKED TO 70 / 100 V CONSTANT VOLTAGE LINE
(MR 40T, MR 40T W only)
If this speaker is connected to a 100 / 70 V constant voltage line,
select its proper power rate by turning its rotary switch (by using
a screw-driver) among the values 20 – 10 – 5 – 2.5 W (100 V) or
20 – 10 – 5 – 2.5 – 1.25 W (70 V).
WARNING:
- Do NOT select the 8 Ω position
(as this may damage the
speaker and the amplifier)!
- Do NOT select the 20W-70V position when linked to a
100 V line!
POWER SELECTION WHEN LINKED TO 70 / 100 V CONSTANT VOLTAGE LINE
(MR 50T, MR 50T W only)
If this speaker is connected to a 100 / 70 V constant voltage line,
select its proper power rate by turning its rotary switch (by using
a screw-driver) among the values 40 – 20 – 10 – 5 W (100 V) or
40 – 20 – 10 – 5 – 2.5 W (70 V).
WARNING:
- Do NOT select the 8 Ω position (as this may damage the
speaker and the amplifier)!
- Do NOT select the 40W-70V position when linked to a
100 V line!
TERMINAL STRIP CONNECTION
Remove the protective cover on the back (by unscrewing the two screws) to access the
removable connector (EUROBLOCK type).