RCF HDL 50-A, Руководство пользователя, Страница: 22 / 28

Stop lifting and insert and lock the second Locking pins (Safety
pins) to prevent the system from going into compression
shifting the tilt of the module, and consequently of the cluster.
Insert the front locking pins in the proper hole. These are 2
additional pins do not load the weight of the system but serve
to maintain the fixed angle between the modules especially if
they go into compression in very curved systems
Pull out the front and rear pin from the cart and remove it
Remove all locking pins of the second cart cabinets and preset
the splay angles of all cabinets based on HDL 50 A Shape
Designer software turning the rear bracket into the upper
module and inserting the pin in the proper position.
Fix the quicklock pin supplied with the speaker in the proper
hole in the front of the last speaker then lower the height of the
system in order to reduce the angle between the speakers until
they join.
SUSPENSION
ANGLE PIN 5°
LOCKING PIN
PER SUSPENSION
PIN 5°
FISSARE L’ANGOLO
CON IL RELATIVO
LOCKING PIN