EN
17
Advanced Sound Control
Fine Setting of the Speakers
All the basic settings have already been presetted for the
speakers included in the box.
However, to make the surround sound more effective and
suit the acoustic conditions in your listening room, you may
need to delay the signal coming from some of the speak-
ers. Channel delay compensates for center or surround
speakers that are closer to the listening position than the
front speakers.
You may setup the speakers channel by channel: while in
stop mode, enter the setup menu, then choose SOUND for
speaker setup.
To change the speaker distance
In the DISTANCE menu, press
UP/DOWN
to select a speaker.
press
OK
to select the speaker channel which you want to
adjust, then press
UP/DOWN
to adjust the distance from
the front, rear and center speakers individually.
To test the speaker setting and change the speaker
level
In the TEST TONE menu, a short noise will come from each
speaker respectively, press
UP/DOWN
to configure the cur-
rently playing speaker.
Advanced Setting
Factory Default Setting
The receiver speaker distance default settings are the
following:
Front speakers (L/R)
4.5 feet
Center speaker (Cch)
4.5 feet
Rear speaker (SUR)
4.5 feet
IMPORTANT NOTE
• Always use the subwoofer for optimum sound
quality.
0 dB
Front Left Gain Control
