Operating Your Receiver
EN
13
Switching on /off
• To switch on the receiver, press
STANDBY/ON
on the
receiver once to wake up from standby mode. Press one of
the source buttons or
ON/OFF
on the remote control to
turn on the receiver.
• When the receiver is on, press
ON/OFF
on the remote or
STANDBY/ON
on the receiver to return to the standby
mode.
When you turn up the unit for the first time:
1. A startup menu will show on the screen when you turn
on the unit for the first time.
2. Use
UP
/
DOWN
to highlight the language you want, then
press
OK
.
3. The chosen language will be your default menu lan-
guage.
Selection of Audio source
When one of the audio source is selected, the audio input
corresponding to the name will be activated.
The receiver acts as a switching device between all the
sources that are plugged into it.
Example 1:
If you connect a MD player to the AUX 1 input on the
receiver and press
SOURCE
until “AUX 1” shows on the
display. You will be able to have the signal from the MD
player.
STANDBY/ON
PHONE
AUX 2
AUX 2
VCR
VCR
AUX 1
AUX 1
SA
SAT.CABLE
.CABLE
English
Select a Menu Language
Select langue de menu
Seleccione Idioma Menu
Menusprache auswahlen
Selez lingua dal menu
Francais
Espanol
Deutsch
Italiano
Note
:
When the startup menu shows on the
display, the
OPEN/CLOSE
button is
disabled.
