background image

EN

2

Battery Back-Up Operation

This clock radio is equipped with a memory
holding system that can be powered with
a 9-volt battery (not included).  The power
failure protection circuit will not operate
unless battery is installed.
When normal household power is inter-
rupted, or AC line cord is unplugged, the
battery will power the clock radio to keep
track of time and alarm settings pro-
grammed into memory.  When the battery
backup functions, 

the digital display will

not be backlighted

, however, the function

of alarm still occurs during the power in-
terruption if remaining battery power is
adequate.  Normal operation will resume
after AC power is restored so you will not
have to reset the time or the alarm.

Install battery as follows:

1. Remove battery compartment door (lo-

cated at the bottom of the radio) by ap-
plying thumb pressure to area indicated
on battery door and then lift the door
out and off the cabinet.

2. Connect a 9-volt battery to the connec-

tor plug.

3. Insert battery in the compartment and

replace the compartment door.

Power Failure Indicator

When AC power is interrupted (discon-
nected) for a short period of time, both
time and alarm settings will change (un-
less optional battery is installed).  After AC
power is restored (reconnected), the Digi-
tal Display will blink to indicate that power
was interrupted and you should readjust
the time and alarm settings.

Note:  Alkaline (NEDA 1604A / IEC 6LR61) battery is

recommended.  Carbon Zinc (NEDA 1604 / IEC 6F22) bat-

tery may be used but memory holding time will be substan-

tially reduced.  Memory  holding time for a fresh alkaline battery is

approximately 8 hours (if radio or alarm is not operated), which should
take care of short, nuisance-type AC power failures.  To preserve
battery life, the radio should remain plugged into an AC outlet.  As
batteries get older, their voltage drops and memory may be lost.  Be
sure to replace the battery periodically.  Battery should be removed
if the radio will be stored for more than one month.  Leaky batter-
ies may badly damage the clock radio.

RP3722 EN-CAN

3/8/02, 3:57 PM

3

Содержание RP3722









Отзывы: