manualshive.com logo in svg

RCA RCRN03BR, Руководство пользователя

Поделиться
Скачать
RCA RCRN03BR Скачать руководство пользователя страница 14

NO:

 Press POWER again. The remote tests the next code. Keep pressing 

POWER every 2 seconds until your device turns off. When it does press 

STOP. 

 

 

 

 

NOTES: 

Throughout the programming of each key, keep the remote pointed at the IR 

sensor of the device you are programming the remote to control.

 

Test the remote with the device to make sure the device key is programmed with the 

correct code for maximum functionality. If some features don’t work, try a different code. 

See the “Testing the Code for Maximum Functionality” section below for more 

information. 

 

During the Manual Code Search, the remote ignores keypresses that aren’t part of the 

search. The search times out after two minutes (the POWER key blinks four times and 

turns off, and the last programmed code under that device key is retained). 

The POWER key blinks four times and turns off when the remote has gone through all 

the codes. The remote exits the Brand Code Search. If your device hasn’t turned off 

yet, try a different search method. 

 

TIPS

: because there are so many codes, you may have to press the POWER key 

many times—possibly hundreds of times. 

 

Содержание RCRN03BR





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды