RCA RCR311S, Руководство пользователя

Страница: 15 / 48

15
functions on your unit, and the
VCR•DVD
key controls the
VCR or DVD functions. There is a specific section in the
Code Lists for combo units. The codes in this section should
be tried first using Direct Code Entry on the
TV and
VCR•DVD
keys. If this is unsuccessful, follow the normal
programming methods for both the TV and the VCR•DVD
keys.
• Make sure the batteries are fresh and are properly installed.
Problem: The remote is not performing commands properly.
• You must put the remote in the correct mode by pressing
the corresponding component key (
TV
,
VCR•DVD
,
SAT•CBL ) so the remote knows which component you
want to operate.
• Make sure component is “ready” (e.g., DVD player
has disc loaded; VCR has tape loaded, etc.).
• You may have pressed an invalid key for the mode
the remote is in.
• If you’re trying to turn on an RCA, GE or PROSCAN
branded component, press the component key ( TV ,
VCR•DVD
,
SAT•CBL
) instead of the
ON•OFF
key.
• If you’re trying to change channels, try pressing the
OK key after entering the channel number, as this is
a requirement of certain models and brands.
• There is a possibility that a programmed code may only
be able to control some of your component features (e.g.,
only turns a component on and off). See “Testing the Code
for Maximum Functionality” (page 8-9) for more
information.
Problem: The illuminated ON•OFF key does not light when
you press a key.
• You must put the remote in the correct mode by pressing
the corresponding component key (
TV
,
VCR•DVD
,
SAT•CBL ) so the remote knows which component you
want to operate.
• You may have pressed an invalid key for the mode
the remote is in.
• Make sure the batteries are fresh and are properly installed.
(See Battery Installation on page 3.)
Replace the batteries with two new AA batteries,
if necessary. Reprogramming may be required.
Problem: The VCR won’t record.
• Make sure the remote is in VCR Mode.
• Make sure the tape is properly loaded in the VCR.
• Make sure the tape is not write-protected. If the safety
tab is removed, the tape is write-protected, and you cannot
record onto that tape.
Problem: The remote will not change channels
on your component.
• You must put the remote in the correct mode by pressing
the corresponding component key ( TV , VCR•DVD ,
SAT•CBL
) so the remote knows which component you
want to operate.
• Press the OK key after you enter a channel number.
• Remove any obstacles between the remote and the
component. Make sure to aim the remote at the IR
sensor on the component.
Problem: The component’s menu doesn’t appear
on the TV screen.
• Make sure you have connected your component to your TV
properly and selected the correct Input. (See your
components’ Owner’s Manuals for proper connection
procedures.)
• You must put the remote in the correct mode by pressing
the corresponding component key (
TV
,
VCR•DVD
,
SAT•CBL ) so the remote knows which component you
want to operate.
• Menu access isn’t supported for all brands. If that’s the
case, you’ll need to use your original remote control to
access menu functions for these components.
For more information, please visit www.rca.com.
RCR311S_NA_IB_REVB_K4.qxd 7/27/04 11:41 AM Page 15