!
b. While holding down the
VCR•DVD
key, press and
release the number 2 key on the
keypad to control a VCR or the
number 3 key to control a DVD.
The illuminated
ON•OFF
key
turns off.
c. Release the
VCR•DVD
key. The
illuminated
ON•OFF
key blinks
four times and then turns off.
Your remote is now either in
VCR or DVD Programming
Mode, depending on which you
chose. Proceed to step 4.
4. Press and hold the component key
(
TV
,
VCR•DVD
,
SAT•CBL
) you
wish to program. The illuminated
ON•OFF
key turns on and
remains on.
5. While holding the component key
down, press and hold the
ON•OFF
key. The illuminated
ON•OFF
key
turns off.
6. After holding down both keys for
three seconds, the illuminated
ON•OFF
key turns back on.
7. Release both keys. The illuminated
ON•OFF
key remains on.
TIP:
Throughout the programming
of each key, be sure to keep the remote
pointed at the IR sensor of the
component you are currently
programming the remote to control.
8. Press and release the
ON•OFF
key
repeatedly, waiting 4 seconds
between each key press, until your
component turns off. Each time
you press the
ON•OFF
key, the
illuminated
ON•OFF
key blinks,
and the next code is sent. This
process continues until all of the
codes in the Code Lists have been
searched. If your component turns
off, you have found the correct
code. (If it cycles through and the
illuminated
ON•OFF
key blinks
four times and turns off, all codes
have been searched. The Manual
Code Search method is exited.)
9. Once your component turns off,
you have found the correct code.
You must save the new code by
pressing and releasing the
STOP
key. The illuminated
ON•OFF
key
turns off.
You must press the
STOP
key to save the code or the
correct code will not be stored!
Testing the Code for
Maximum Functionality
To confirm that the component key is programmed with the
correct code for maximum functionality, it is necessary to test
the component. If some of the features of your component do
not work, different codes in the list can be tried until you find the
code that allows the remote to control the majority of your
component’s functions. Different codes can provide different
levels of functionality. Follow these steps to test for maximum
functionality.
Programming Methods (continued)
ON
•
OFF
ON
•
OFF
ON•OFF
(BLINK)
ON•OFF
(BLINK)
ON•OFF
SAT
•
CBL
VCR
•
DVD
TV
8
ON
•
OFF
STOP
VCR
•
DVD
VCR
•
DVD
ON•OFF
(BLINK)
RCR311S_NA_IB_REVB_K4.qxd 7/27/04 11:41 AM Page 8
